Description

EP-9GL-2.5/2.9 Trailed Mower-Rake: Industrial 2-in-1 Integrated Precision Harvesting Solutions for Global Agriculture

The Ever-Power India Straw Baler Co., Ltd. EP-9GL-2.5/2.9 Trailed Mower-Rake is a versatile, high-efficiency agricultural machine designed to consolidate forage harvesting workflows by integrating mowing and raking into a single operational pass.¹ Featuring a 2.5-meter cutting width and a 2.9-meter raking width, this side-trailed unit is specifically engineered for flat pastures and moderate slopes where maximizing daily acreage is critical. Optimized for mid-range tractors between 35 to 75 HP, it utilizes a precision reciprocating system that delivers a clean cut and uniform windrows simultaneously. This industrial-grade 2-in-1 machine offers a professional alternative to multi-stage harvesting, significantly reducing fuel consumption and soil compaction.

Five Key Facts

• Integrated 2-in-1 Productivity: Combines the cutting of forage and the immediate formation of windrows into one passage, saving time, fuel, and labor costs.

• Optimized Width Calibration: Delivers a 2.5m mowing width serviced by 34 induction-hardened blades and a 2.9m raking width utilizing 42 high-tensile spring teeth.

• Low Power Requirement: Specifically designed for high-efficiency operation with standard utility tractors in the 35 to 75 HP range.

• Advanced Hydraulic Maneuverability: Features a centralized hydraulic lifting system for both harvest modules, allowing for single-operator row-end turns and transport folding.

• Industrial Frame Durability: Built with a reinforced 920 kg chassis and HRC 58-62 hardened wear parts to resist abrasive crop residues and harsh terrain.

Modular Product Analysis

1. Integrated Dual-Stage Architecture: Workflow Transformation

The EP-9GL-2.5/2.9 represents a mechanical breakthrough in residue management by effectively merging two harvesting stages into a single unit. By mounting the reciprocating mower bar in synchronized alignment with the spring-tine rake, forage is cut and immediately gathered into airy windrows. This eliminates the need for a second tractor pass, reducing total field operational hours by nearly 50%. For commercial contractors, this synchronization prevents the “double-wheeling” of soil, preserving the structural integrity of sensitive pasture roots.

2. Precision Reciprocating Cutting and 42-Tooth Gathering

The cutting module utilizes 34 precision-engineered moving blades to execute a shearing “scissor-cut” at an average stubble height of 60-70 mm. This shearing action is vastly superior to rotary impact systems as it minimizes moisture loss at the stem and promotes rapid meadow recovery. Following the cut, the raking module employs 42 high-tensile spring teeth with a 71mm spacing. This spacing is optimized to capture even fine natural grasses with a leakage rate below 2%, ensuring high-purity material collection for high-density baling.

3. S9000-Series Hydraulic Reliability and Maneuverability

Derived from Ever-Power India’s S9000 industrial standards, the EP-9GL-2.5/2.9 is equipped with high-pressure hydraulic lifting modules. The operator can raise or lower the harvest bars using the tractor’s cabin controls, facilitating instant adjustment for field obstacles or headland turns. During road travel, the machine folds into a compact state, complying with standard transport regulations. The side-towed geometry ensures that the tractor wheels do not trample the uncut forage, maintaining the nutrient profile of the entire harvest.

4. Metallurgical Superiority and Wear Resistance

The 34 mowing blades are manufactured from high-carbon gear steel and subjected to localized induction hardening, reaching a surface hardness of HRC 58-62. This allows for continuous operation in high-silica rice straw and abrasive dryland wheat fields. The 42 rake teeth are made from premium spring steel that undergoes stress-relief tempering, preventing the snapping or deformation common in budget equipment during high-speed raking at 7 km/h.

Technical Specifications Table

Feature	Technical Specification Detail
Model Name	EP-9GL-2.5/2.9 Integrated Trailed Mower-Rake
Hitch Type	Trailed / Pull-type
Mowing Width	2.5 Meters
Raking Width	2.9 Meters
Required Tractor Power	25 to 55 kW (35 to 75 HP)
Number of Mowing Blades	34 High-Strength Blades
Number of Rake Teeth	42 Spring-Steel Teeth
Tooth Spacing	71 mm
Mowing Productivity	1.2 to 1.44 ha/h
Raking Productivity	1.5 to 1.8 ha/h
Operating Speed	6 to 7 km/h
PTO Input Speed	540 r/min
Stubble Height	60 to 70 mm
Total Structure Weight	920 kg
Working Dimensions	3100 x 5000 x 950 mm (L x W x H)
Transport Dimensions	3100 x 2920 x 2900 mm (L x W x H)

Global Application Scenarios

The EP-9GL-2.5/2.9 is optimized for professional residue management across diverse global environments:

• US Midwest Dairy Zones: Integrated harvesting of alfalfa-grass mixes for high-purity silage.

• Australian Wheat Belt: Collecting cereal straw in low-humidity environments post-combine.

• Indian Cereal Hubs: High-efficiency straw recovery to support local livestock fodder markets.

• Brazilian Sugarcane Fringes: Clearing inter-row vegetation in large-scale tropical plantations.

• Inner Mongolian Prairie: Wild grass harvesting for national winter survival stockpiles.

• Thai Sugarcane Zones: Reducing field burning via mechanized integrated residue recovery.

• European Vineyard Alleys: Integrated weed and moisture management in organic vineyards.

• Middle Eastern Bedding: Providing dense, clean bedding material from grass and straw.

• Canadian Hay Exports: Producing high-RFV hay for international containerized shipping.

Brand Compatibility and Replacement Guide

The EP-9GL-2.5/2.9 is engineered as a direct high-performance replacement for standalone mowers and rakes from premium global brands.

Target Brand	Comparable Fleet	Ever-Power India 2-in-1 Advantage
John Deere	350 Sickle Mower + Side Delivery Rake	35% lower cost; Integrates both tasks into one pass.
Krone	EasyCut + Swadro Rakes	Reciprocating scissor-cut preserves leaf protein better.
New Holland	451 Sickle Bar + ProCart Rake	Lower power requirement (35 HP min) for utility tractors.
Case IH	DC Series Mowers	Robust 920 kg reinforced frame designed for harsh terrains.
Kuhn	GMD Mower + GA Rake	Side-trailed design prevents tractor trampling of uncut forage.
Massey Ferguson	MF Series Sickle + Rake	Induction-hardened blades offer superior wear resistance.

Installation and Operational Guide

1. Mechanical Hitching: Align the tractor’s drawbar with the pull-type frame. Ensure the mower bar sits parallel to the ground to maintain the target stubble height.

2. PTO Integration: Connect the safety torque drive shaft to the 540 r/min PTO. This provides power for the reciprocating blades and the rake modules.

3. Hydraulic Connection: Attach the hoses to the tractor’s rear remotes. Test the independent lift cycles for the cutterbar and rake from the cabin.

4. Tension Verification: Check the 34 blades for proper clearance against the ledger plates and verify the tension of the 42 rake teeth.

5. Ground Speed: Begin at 5 km/h to calibrate, then increase to 6-7 km/h for optimal productivity.

Enriched Customer Success Stories

Case Study 1: Large-Scale Forage Contractor in Novosibirsk, Russia

“In Siberia, the harvest window between frost and rain is brutally short. We transitioned to the Ever-Power India EP-9GL-2.5/2.9 because it was the only unit that could mow and rake our native steppe grasses in one pass. Our daily productivity increased by 40% simply because we no longer needed a separate operator and tractor following the mower. Even with heavy morning dew, the reciprocating bar delivered a clean cut without the ‘wrapping’ issues we faced with rotary units.”

Case Study 2: Biomass Power Co-op in São Paulo, Brazil

“Abrasive sugarcane residue post-harvest used to destroy our standard rakes. The induction-hardened blades and high-tensile spring teeth of the EP-9GL-2.5/2.9 have maintained their structural alignment for two full seasons of industrial-scale recovery. The hydraulic lift allows our operators to avoid hidden stumps instantly, which has reduced our machinery downtime by nearly 60%. We now supply uniform windrows to our baling teams at 15% lower fuel costs.”

Case Study 3: Dairy Cooperative in Maharashtra, India

“For high-protein hay, a clean cut is essential. The Ever-Power India mower-rake provides the gentle scissor-cut we need to preserve the leaf integrity of our alfalfa. Our local operators found the hydraulic lifting system very intuitive, and the low 35-HP requirement means we can use our existing small tractor fleet for industrial-grade work. The 2-in-1 integration has fundamentally changed our profitability during the monsoon breaks.”

Frequently Asked Questions

• What is the minimum horsepower required? A utility tractor with at least 35 HP (25 kW) is required for effective 2-in-1 operation.

• How wide is the transport width? The unit folds to a road-legal transport width of 2.92 meters and height of 2.9 meters.

• Can I use the mower and rake separately? Yes, the hydraulic controls allow for the independent operation of each harvest module if field conditions require it.

• How many blades does the cutterbar use? The 2.5m bar features 34 precision-aligned moving blades.

• What is the maximum ranking productivity? The machine can rake up to 1.8 hectares per hour at an optimal speed of 7 km/h.

• Does it handle abrasive rice straw? Yes, the induction-hardened blades (HRC 58-62) are designed to resist wear from high-silica cereal straw.

• Is the tooth spacing adjustable? The teeth are fixed at a professional 71mm spacing for maximum recovery of fine material.

• How heavy is the structural chassis? The industrial-grade structure’s weight is 920 kg, ensuring stability during high-speed field work.

• What is the PTO speed requirement? It is optimized for a standard 540 r/min input.

• Where can I purchase replacement parts? Ever-Power India provides a 24-hour global service network for all standardized ISO parts.

About Ever-Power India Straw Baler Co., Ltd.

Established in February 2021, Ever-Power India is a comprehensive modern industrial enterprise specializing in the R&D, production, and service of intelligent agricultural machinery.

• Infrastructure: Our facility covers over 32,000 square meters of modern industrial space.

• Workforce: We employ 180 professionals, including senior mechanical engineers.

• Technology: We possess nearly 100 technical patents and utilize advanced computer-aided design.

• Manufacturing Power: Two automated production lines with an annual capacity of 2,000 sets each.

• Honors: National High-Tech Enterprise with ISO 9001 certification and an AAA-level credit rating.

Contact Us:

• Email: [email protected]

Enriched Related Products

To maximize the performance of your EP-9GL-2.5/2.9 integrated unit, we recommend the following integrated EVER-POWER solutions:

• EP-9YG-1.25A Round Baler: The perfect follow-up for the 2.9m windrows. This baler features a massive 2240mm pick-up width and proprietary axle-flow feeding, capable of creating 1000-catty high-density bales for industrial biomass logistics.
• 9JYY-2.5 Bale Pickup and Transport Vehicle: Once your high-density bales are produced, the 9JYY-2.5 provides a professional mechanized logistics solution. Capable of loading up to 2500 kg using tractor hydraulics, it eliminates the need for manual handling and minimizes soil compaction during recovery.
• 9GQY-3.2 Mower Conditioner: For high-moisture silage and reeds, this mower conditioner uses a double-suspension system to ensure a clean cut on uneven terrain, accelerating drying for faster baling in humid environments.
• 4. 9F-70 Forage Crusher: For industrial biomass energy hubs, the 9F-70 processes finished round bales into high-quality feedstock at a rate of up to 20 tons per hour, ideal for bio-fuel pellets or dairy feedlot rations.